NO1. Vertical Turbine Pump

We have rich experience in producing the vertical turbine pump, and we have exported it to many countries like Malaysia, Russia, Indonesia, Peru, Chile and so on. It iw widely used in transporting clean water and sewage containing certain solid particles (such as iron chips, sand, coal powder, etc.), corrosive industrial wastewater and seawater. The body temperature should not exceed 80 C. It is widely used in raw water treatment plants, sewage treatment plants, metallurgical and iron industry (especially swirling pools in this industry to transport scaled iron oxide water), power plants, mines, municipal works and farmland water conservancy projects. The series of products have been proven to be reliable in performance, stable in operation and could meet the international standards.

NO2. RV-SP Vertical Slurry Pump

RV-SP vertical slurry pump is a single-stage and single-suction vertical centrifugal pump. The fluid flows out along the axis of the pump shaft at 70 degrees. The main components are volute, impeller, pump base, pump shell, support barrel, motor base, etc. It is widely used in landfill pits and coal-water pits in coal washing yards of thermal power plants, discharge of high-concentration coal-bearing slag wastewater, and suction of dense liquids, dirty liquids, pastes, flowing sand and flowing sludge from urban rivers in municipal, chemical, printing and dyeing, medicine, shipbuilding, foundry and food industries and so on. 

NO3. PWDDFL Series Submerged Sewage Pumps  

PWDDFL series submerged sewage pumps are single-stage and multi-suction vertical centrifugal pumps. The impeller is three single-chord curved blades. The semi-closed impeller is selected and malleable cast iron is used, so it has high strength and corrosion resistance. It is easy to process, good throughput and high efficiency. Three single impeller can play a good role in stirring, replacing the traditional structure of stirring head, reducing the shaft power of the pump, saving the cost of motor matching and electricity. It is widely used in coal pits in coal washery of thermal power plant, leachate catchment pits, discharge of high concentration waste water containing coal slag. It can also be used in municipal, chemical, printing and dyeing, medicine, shipbuilding, foundry, food and other industries to suck thick liquid, dirty liquid, paste, flowing sand and flowing sludge in urban rivers to remove sludge from coal mines. The fluid of small gravel. Waste water containing high concentration of iron oxide scale in iron oxide pit of smelter, etc. The series of products have been proven to be reliable in performance, stable in operation and meet the international standards.

NO4. Vertical Canned Process Turbine pump

Vertical Canned Process Turbine pumps  is a special kind of multistage centrifugal pump, is energy efficient products of our company according to the market demand for independent development, carefully designed, with high efficiency, cavitation performance, advanced structure, long service life and convenient installation and maintenance etc.. Applicable to the transport of condensate and other liquids similar to condensate.

 Performance range

Speed: 1480 r/min

Flow rate: 120 ~ 2200m3/h

Lift: 36 ~ 500m

 Working conditions

Medium temperature：less than or equal to 80℃，special material can reach  120℃

Direction  rotation: turn counterclockwise from the drive side.

 Model significance

200JLDTN-485

200 - outlet diameter 200mm

JLDTN -- Vertical Canned Process Pumps

485 - designed head at 485m

 Structure description

Vertical Canned Process Pumps is a vertical external simplified pump with three structural forms.

(1) Type A-Initial Dual-suction Guide Vane Multi-stage Centrifugal Condensation Pump

(2) B-initial stage double suction helical guide vane multi-stage centrifugal condensation pump

(3) C-initial stage double suction helical oblique flow multi-stage condensation pump

NO5. H Series Right Angle GearBoxes

H series right angle gear box is a horizontal shaft directly connected with the internal combustion engine, horizontal motor, gas turbine and other prime movers. After reducing (or increasing) speed, the power is output from the vertical shaft. It can withstand the axial thrust and transfer the power of the horizontal axis of the prime mover to the vertical pump shaft for transmission and speed change of deep well pump, axial flow pump, oblique flow pump, long shaft pump, submerged pump and other vertical shaft working machines.

Performance and Advantages of H Series Right Angle Gear Box

Various models and transmission ratios can meet the requirements of high and low speed prime movers and working machines. Strong ability to withstand vertical axial forces makes the structure of working machines simplified. H series gearbox has the characteristics of wide application range, economy, high efficiency, space saving and suitable for various climatic conditions.

Application Range of H Series Right Angle Gear Box

It can be widely used in water conservancy engineering, municipal engineering, metallurgical mine, petrochemical industry, fire protection and marine engineering and other fields.

technical parameter

Input speed: 245-3460 rpm

Output speed: 490-3460 rpm

Growth ratio: 1:1-1:2 deceleration ratio: 4:1-11:10

Power: 0-1520HP

Able to withstand maximum axial thrust: 125000N